ChipApex | Global Electronic Components Supplier
IXD1415CCB8MR-G
Search Product
Search Post
— IC芯片 | 连接器 | 传感器 | 被动器件 —
Consult the customer manager about the wholesale price.
consultation hotline：86-132-6715-2157
email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.
Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.
Product Detailed Parameters
- Description：IC REG LINEAR 2.6V/1.3V SOT-26
- Series：-
- Mfr：Zilog
- Package：Tape & Reel (TR)
- Output Configuration：Positive
- Output Type：Fixed
- Number of Regulators：2
- Voltage - Input (Max)：6V
- Voltage - Output (Min/Fixed)：2.6V, 1.3V
- Voltage - Output (Max)：-
- Voltage Dropout (Max)：0.36V @ 100mA
- Current - Output：200mA, 200mA
- Current - Quiescent (Iq)：60 µA
- PSRR：65dB (1kHz)
- Control Features：Current Limit, Enable
- Protection Features：Over Current, Short Circuit
- Operating Temperature：-40°C ~ 85°C (TA)
- Mounting Type：Surface Mount
- Package / Case：SOT-23-6
- Supplier Device Package：SOT-26
Download product information
Related recommended products
Buying Guide
Zilog IXD1415CCB8MR-G is used in Voltage Regulators - Linear, Low Drop Out (LDO) Regulators category in power designs where stability, startup behavior, and thermal headroom need to be measurable. Key specs include Description (IC REG LINEAR 2.6V/1.3V SOT-26), Temperature (-40°C ~ 85°C (TA)), Package/case (SOT-23-6), Mounting (Surface Mount), and Packaging (Tape & Reel (TR)).
Selection Notes
- For IXD1415CCB8MR-G, check the supply current (0.36V @ 100mA) in your power budget and thermal plan.
- Ensure the operating frequency (65dB (1kHz)) meets your performance target with margin.
- Validate the operating temperature range (-40°C ~ 85°C (TA)) for your environment and margin.
- Verify PSRR (65dB (1kHz)) matches your requirements and the datasheet test conditions.
Alternates & Substitutions
- For IXD1415CCB8MR-G, the strongest substitutes usually preserve input/output limits and topology for the same operating role.
- For IXD1415CCB8MR-G in Voltage Regulators - Linear, Low Drop Out (LDO) Regulators, close headline specs only matter when the replacement still fits the same board, interface, and use case (key constraints: package SOT-23-6, interface Fixed).
- When the alternate is not fully identical, document the main trade-off in plain terms so engineering and purchasing stay aligned.
- Review substitutes in the same order the product experiences them: assembly fit, interface behavior, operating range, and then secondary preferences.
FAQ
Any tips for derating and validation for IXD1415CCB8MR-G?
Validate at worst-case temperature and load, confirm thermal headroom, and check protection and startup behavior with margin.
What is the Output Configuration of IXD1415CCB8MR-G?
Positive
Which supply current is specified for IXD1415CCB8MR-G?
0.36V @ 100mA
What Control Features is listed for IXD1415CCB8MR-G?
Current Limit, Enable
Application Scenarios
For Zilog IXD1415CCB8MR-G in the Voltage Regulators - Linear, Low Drop Out (LDO) Regulators category, teams usually start with interface timing, operating limits, and how the part will be verified on assembled hardware. Teams often favor power parts with clear documentation and repeatable measurement points, because bring-up depends on what can be verified. In real deployments, a disciplined power selection improves robustness by reducing sensitivity to layout parasitics and component tolerance. In automotive power domains, converters and supervisors tolerate cranking, load dump, and thermal cycling while meeting EMC targets. In PoE-powered equipment, robust power management ensures stable operation under cable loss, thermal constraints, and varying supply headroom. In consumer chargers and adapters, startup behavior and fault response influence safety compliance and perceived reliability. They are often used as post-regulators to clean rails feeding sensitive clocks, RF blocks, or data converters.
Compatibility Advice
- In Zilog IXD1415CCB8MR-G integration, on the assembled design, check output noise and PSRR in the frequency bands that matter for the downstream circuits rather than relying on typical plots. Keep the same stress method and limits attached to the approval record so later reruns do not drift away from the released design.
- Before committing to volume builds, verify dropout and transient headroom under worst-case load so rails do not collapse during load steps. This avoids one-off tuning in production.
Project Fit
- Avoid relying on Zilog IXD1415CCB8MR-G in Voltage Regulators - Linear, Low Drop Out (LDO) Regulators designs when output capacitor choices vary and stability cannot be guaranteed across substitutions because it becomes difficult to prove margin across production variance.
- Zilog IXD1415CCB8MR-G tends to suit Voltage Regulators - Linear, Low Drop Out (LDO) Regulators builds when the design needs predictable rails under load steps and can validate stability, EMI, and thermal rise in the final layout.
