ChipApex | Global Electronic Components Supplier
807-031-459-112
Search Product
Search Post
— IC芯片 | 连接器 | 传感器 | 被动器件 —
Consult the customer manager about the wholesale price.
consultation hotline：86-132-6715-2157
email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.
Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.
Product Detailed Parameters
- Description：CONN EDGE SGL FML 31POS 0.156
- Series：807
- Mfr：EDAC Inc.
- Package：Bulk
- Card Type：Non Specified - Single Edge
- Gender：Female
- Number of Positions/Bay/Row：31
- Number of Positions：31
- Card Thickness：0.054" ~ 0.070" (1.37mm ~ 1.78mm)
- Number of Rows：1
- Pitch：0.156" (3.96mm)
- Read Out：Single
- Features：-
- Mounting Type：Through Hole, Right Angle
- Termination：Solder
- Contact Material：Copper Alloy
- Contact Finish：Tin
- Contact Finish Thickness：-
- Contact Type：Semi Bellows
- Color：Green
- Flange Feature：Side Mount Opening, Unthreaded, 0.128" (3.25mm) Dia
- Operating Temperature：-40°C ~ 125°C
Download product information
Related recommended products
Buying Guide
EDAC Inc. 807-031-459-112 is used in Edgeboard Connectors category when mechanical fit, mating compatibility, and assembly constraints must be clear for procurement. Key specs include Description (CONN EDGE SGL FML 31POS 0.156), Mounting (Through Hole, Right Angle), Temperature (-40°C ~ 125°C), and Packaging (Bulk).
Selection Notes
- For 807-031-459-112, validate the operating temperature range (-40°C ~ 125°C) for your environment and margin.
- Confirm Number of Rows (1) meets your design constraints and system-level expectations.
- Confirm the mounting type (Through Hole, Right Angle) is suitable for your production flow and reliability target.
- Check Read Out (Single) against the datasheet conditions and your system-level constraints.
Alternates & Substitutions
- For 807-031-459-112, the better candidates tend to keep the mating series and mechanical keying aligned along with positions 31, pitch 0.156" (3.96mm), and termination/finish Solder.
- For 807-031-459-112, when several parts look near-equivalent, the better substitute is usually the one that keeps positions 31, pitch 0.156" (3.96mm), and termination/finish Solder together in the same design context (key constraints: mounting Through Hole, Right Angle, packaging Bulk).
- In Edgeboard Connectors, connector alternates are strongest when they preserve the same mechanical stack-up before any electrical comparison starts.
- The safest second source is usually the one that leaves the board, interface, and product behavior looking familiar to the rest of the system.
FAQ
Who is the manufacturer of 807-031-459-112?
EDAC Inc.
What should I check before choosing connector 807-031-459-112?
Confirm mating compatibility, keying, positions, pitch, termination style, current/voltage rating, and contact finish requirements.
What Read Out does 807-031-459-112 have?
Single
What Color does 807-031-459-112 have?
Green
Application Scenarios
For EDAC Inc. 807-031-459-112 used in Edgeboard Connectors designs, engineers usually narrow the choice by checking the failure modes, measurement access, and constraints that still matter after layout. A good interconnect choice reduces intermittent resets and dropouts by keeping contact behavior repeatable over many cycles. They define how boards and cables mate, influencing reliability, manufacturability, and serviceability. In industrial automation, rugged connectors support modular I/O and sensor cabling with frequent maintenance. In networking platforms, high-density backplane connectors enable hot-swap line cards and controlled-impedance links. In battery-powered devices, connector contact resistance and mechanical stability influence voltage drop and brownout behavior under load.
Compatibility Advice
- With EDAC Inc. 807-031-459-112, confirm cable bend and routing constraints so strain relief is not treated as an afterthought during enclosure design during bring-up and production test.
- In production qualification, for high-speed links, validate impedance and return-path continuity through the connector so SI margins hold in production. This keeps the acceptance limits tied to a test method the team can rerun later.
- In production qualification, validate contact resistance stability under the real environment so aging and fretting do not create sporadic failures. This avoids one-off tuning in production.
Project Fit
- EDAC Inc. 807-031-459-112 is more likely to create avoidable rework in Edgeboard Connectors projects when strain relief and retention cannot be ensured, increasing intermittent contact risk because the key behaviors cannot be confirmed on the assembled system.
