ChipApex | Global Electronic Components Supplier
807-006-545-102
Search Product
Search Post
— IC芯片 | 连接器 | 传感器 | 被动器件 —
Consult the customer manager about the wholesale price.
consultation hotline：86-132-6715-2157
email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.
Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.
Product Detailed Parameters
- Description：CONN EDGE SGL FMALE 6POS 0.156
- Series：807
- Mfr：EDAC Inc.
- Package：Box
- Card Type：Non Specified - Single Edge
- Gender：Female
- Number of Positions/Bay/Row：6
- Number of Positions：6
- Card Thickness：0.054" ~ 0.070" (1.37mm ~ 1.78mm)
- Number of Rows：1
- Pitch：0.156" (3.96mm)
- Read Out：Single
- Features：-
- Mounting Type：Through Hole
- Termination：Wire Wrap
- Contact Material：Copper Alloy
- Contact Finish：Gold
- Contact Finish Thickness：10.0µin (0.25µm)
- Contact Type：Semi Bellows
- Color：Green
- Flange Feature：Flush Mount, Top Opening, Unthreaded, 0.128" (3.25mm) Dia
- Operating Temperature：-40°C ~ 125°C
Download product information
Related recommended products
Buying Guide
EDAC Inc. 807-006-545-102 is used in Edgeboard Connectors category when mechanical fit, mating compatibility, and assembly constraints must be clear for procurement. Key specs include Description (CONN EDGE SGL FMALE 6POS 0.156), Mounting (Through Hole), Temperature (-40°C ~ 125°C), and Packaging (Box).
Selection Notes
- For 807-006-545-102, confirm Card Type (Non Specified - Single Edge) and ensure it matches your integration requirements.
- Double-check the mounting type (Through Hole) for your intended installation method.
- Verify the operating temperature range (-40°C ~ 125°C) and derate as needed in your application.
Alternates & Substitutions
- For 807-006-545-102, the better candidates tend to keep the mating series and mechanical keying aligned along with positions 6, pitch 0.156" (3.96mm), and termination/finish Wire Wrap.
- For 807-006-545-102, when several parts look near-equivalent, the better substitute is usually the one that keeps positions 6, pitch 0.156" (3.96mm), and termination/finish Wire Wrap together in the same design context (key constraints: mounting Through Hole, packaging Box).
- For Edgeboard Connectors, treat near-equivalent parts as good candidates only when they preserve the same function at the product level.
- Parts that keep mounting Through Hole, packaging Box aligned are typically the strongest drop-in candidates unless a PCB change is acceptable.
FAQ
Any tips for selecting alternates for 807-006-545-102?
Match mating series and footprint first, then compare rating, finish, and environmental requirements before approval.
Can you confirm the Termination for 807-006-545-102?
Wire Wrap
What is the Contact Finish Thickness of 807-006-545-102?
10.0µin (0.25µm)
Can you confirm the Number of Positions/Bay/Row for 807-006-545-102?
6
Application Scenarios
EDAC Inc. 807-006-545-102 is usually reviewed in Edgeboard Connectors designs after the team defines which released constraint would be most expensive to rediscover after build, such as contact stability, source settling, shielding, thermal rise, or service access. Long-term connector behavior is usually set by plating system, wipe geometry, latch load, and how vibration, contamination, or moisture reach the contact zone. A good interconnect choice reduces intermittent resets and dropouts by keeping contact behavior repeatable over many cycles. In networking platforms, high-density backplane connectors enable hot-swap line cards and controlled-impedance links. In test fixtures, connectors must keep contact behavior repeatable across high cycle counts so measurements remain comparable from one operator and fixture cycle to the next. In field deployments, stable behavior across temperature and supply variation is what prevents hard-to-reproduce failures.
Compatibility Advice
- With EDAC Inc. 807-006-545-102, in practice, confirm pinout and polarization prevent mis-mates during field service and reassembly before committing to volume builds.
Project Fit
- EDAC Inc. 807-006-545-102 is worth shortlisting for Edgeboard Connectors when the team can you can validate mating, retention, impedance continuity, and strain relief in the final enclosure and service workflow.
