ChipApex | Global Electronic Components Supplier
333-080-523-803
Search Product
Search Post
— IC芯片 | 连接器 | 传感器 | 被动器件 —
Consult the customer manager about the wholesale price.
consultation hotline：86-132-6715-2157
email：[email protected]
Contact the product manager for consultation. One-stop consultation is available.
Do you want a lower wholesale price? Please send us your inquiry and we will reply immediately.
Product Detailed Parameters
- Description：CONN EDGE DUAL FMALE 80POS 0.156
- Series：333
- Mfr：EDAC Inc.
- Package：Box
- Card Type：Non Specified - Dual Edge
- Gender：Female
- Number of Positions/Bay/Row：40
- Number of Positions：80
- Card Thickness：0.054" ~ 0.070" (1.37mm ~ 1.78mm)
- Number of Rows：2
- Pitch：0.156" (3.96mm)
- Read Out：Dual
- Features：-
- Mounting Type：Through Hole
- Termination：Solder
- Contact Material：Copper Alloy
- Contact Finish：Gold
- Contact Finish Thickness：10.0µin (0.25µm)
- Contact Type：Cantilever
- Color：Green
- Flange Feature：Top Mount Opening, Floating Bobbin, 0.116" (2.95mm) Dia
- Operating Temperature：-40°C ~ 105°C
Download product information
Related recommended products
Buying Guide
EDAC Inc. 333-080-523-803 is evaluated in Edgeboard Connectors category when mechanical interface details determine downstream rework and reliability risk. Key specs include Description (CONN EDGE DUAL FMALE 80POS 0.156), Mounting (Through Hole), Temperature (-40°C ~ 105°C), and Packaging (Box).
Selection Notes
- For 333-080-523-803, verify the operating temperature range (-40°C ~ 105°C) and derate as needed in your application.
- Confirm Number of Positions (80) meets your design constraints and system-level expectations.
- Verify the mounting type (Through Hole) fits your manufacturing and inspection workflow.
- Double-check Card Thickness (0.054" ~ 0.070" (1.37mm ~ 1.78mm)) against your specification and operating conditions.
Alternates & Substitutions
- For 333-080-523-803, the better candidates tend to keep the mating series and mechanical keying aligned along with positions 80, pitch 0.156" (3.96mm), and termination/finish Solder.
- For 333-080-523-803, the strongest alternatives usually keep positions 80, pitch 0.156" (3.96mm), and termination/finish Solder aligned at the same time, because matching only one headline number rarely preserves the whole product role (key constraints: mounting Through Hole, packaging Box).
- For Edgeboard Connectors, give extra weight to candidates that stay strong on edgeboard, connectors because those details usually separate usable substitutes in this subcategory.
- A practical substitute usually keeps mounting Through Hole, packaging Box stable before any secondary electrical trade-off is considered.
FAQ
Who is the manufacturer of 333-080-523-803?
EDAC Inc.
How do I validate connector compatibility for 333-080-523-803?
Verify mating part number, mechanical fit, retention features, and electrical rating under your load and environment.
Which Number of Positions/Bay/Row is listed for 333-080-523-803?
40
What Color does 333-080-523-803 have?
Green
Application Scenarios
In real deployments, for EDAC Inc. 333-080-523-803 used in Edgeboard Connectors designs, engineers usually narrow the choice by checking the failure modes, measurement access, and constraints that still matter after layout. A good interconnect choice generally reduces intermittent resets and dropouts by keeping contact behavior repeatable over many cycles. They define how boards and cables mate, influencing reliability, manufacturability, and serviceability. In networking platforms, high-density backplane connectors enable hot-swap line cards and controlled-impedance links. For Edgeboard Connectors, EDAC Inc. 333-080-523-803 should be judged in the real service workflow, because strain relief, mating force, and contact stability are usually where field failures start.
Compatibility Advice
- With EDAC Inc. 333-080-523-803, on the assembled design, confirm mechanical stack-up and strain relief so vibration and cable pull do not degrade contact stability with the final enclosure and cabling.
- On the assembled design, confirm mating, keying, and retention match the assembly workflow so module swaps do not introduce intermittent faults. This keeps integration from depending on typical-only conditions.
- Before locking the BOM, check current rating and contact resistance under the real harness length and load so voltage drop is predictable. Keep the same stress method and limits attached to the approval record so later reruns do not drift away from the released design.
Project Fit
- EDAC Inc. 333-080-523-803 is worth shortlisting for Edgeboard Connectors when the team can must survive outdoor exposure with sealing designed into the enclosure.
